区域小微企业群体大规模客户化制造系统模块化组建研究

为提升组建效率,降低组建难度与成本,在分析区域小微企业及其群体特点的基础上,提出由小微企业构建产品制造模块,通过模块的组合,形成大规模客户化制造系统的模块化组建方法.同时,结合对产品制造模块及其构建方式,以及模块选择主要影响因素的分析,研究了基于模块选择系数的制造模块选择策略,为制造系统的模块化组建提供了必要条件.     

Experimental Performance of a Solid Heat Exchanger with Tree-Like Flow Passages

System performance of a solid single-fluid compact heat exchanger with tree-like flow passages has been experimentally examined. The results, presented in the form of commonly defined dimensionless parameters, demonstrate that system performance can be characterized in a mode similar to traditional compact heat exchanger designs. Pressure forces were found to dominate inertia forces at low Reynolds numbers. Correlations of the Euler number, Nusselt number, Colburn factor, and friction factor as a function of Reynolds number were utilized to compare system performance to traditional two-fluid compact heat exchangers.     

Reduced Graphene‐Wrapped MnO2 Nanowires Self‐Inserted with Co3O4 Nanocages: Remarkable Enhanced Performances for Lithium‐Ion Anode Applications

A simple synthetic approach for graphene‐templated nanostructured MnO₂ nanowires self‐inserted with Co₃O₄ nanocages is proposed in this work. The Co₃O₄ nanocages were penetrated in situ by MnO₂ nanowires. As an anode, the as‐obtained MnO₂–Co₃O₄–RGO composite exhibits remarkable enhanced performance compared with the MnO₂–RGO and Co₃O₄–RGO samples. The MnO₂–Co₃O₄–RGO electrode delivers a reversible capacity of up to 577.4 mA h g^?1 after 400 cycles at 500 mA g^?1 and the Coulombic efficiency of MnO₂–Co₃O₄–RGO is about 96 %.     

Sorption of methanol,dimethyl carbonate,methyl acetate,and acetone vapors in CTA and PTMSP: General findings from the GAB Analysis

Sorption of vapors of four organic compounds in two glassy polymers, cellulose triacetate (CTA) and poly[(trimethylsilyl)propyne] (PTMSP), has been reported and analyzed in terms of Guggenheim‐Anderson‐De Boer (GAB) model. These two structurally and physicochemically different glassy polymers both independently showed that one sorption site was formed by about three monomeric units. This finding held true for vapors of all characterized compounds; that is, for methanol, for its derivatives dimethyl carbonate and methyl acetate, and for acetone. The “rule of three” might thus also be applicable to other sorbates and glassy polymers. Further, an original modification of the GAB model for the sorption of alcohols in PTMSP was derived and successfully tested. Overall, the analyses of the sorption isotherms, heats of sorption and diffusion coefficients supported the view that the sorption of vapors in glassy polymers has adsorptive nature. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 561–569     

浮升力和流动加速对超临界CO2管内流动传热影响

基于单相流体的概念,超临界流体的异常传热行为已经被研究很多年了,但是关于其流动传热机理仍没有统一的认识.本文通过理论分析和实验研究了超临界二氧化碳在竖直管内向上流动过程中,浮升力和流动加速效应对其流动结构和传热过程的影响.结果表明,没有确凿的实验证据表明超临界流体的异常传热行为是浮升力和流动加速直接导致的,存在的估计浮升力和流动加速效应准则均是在常物性流体的基础上,做了大量假设得出的,不同的研究者采用浮升力和流动加速准则分析超临界流体的传热恶化得出的结论不一致.最后,基于拟沸腾理论分析超临界流体的传热恶化过程,提出超临界沸腾数区分了超临界流体正常传热与恶化传热的转换边界,为超临界流体流动传热研究提供新思路,超临界沸腾数对建立用于不同技术的超临界流体动力循环的最佳运行条件具有重要意义.     

Addition of SiO2 to the operation of a polyimide cathode in a sodium battery

The effect of the addition of SiO₂ nanoparticles on the properties of a polyimide cathode was explored by CV, XPS, and galvanostatic cycling methods. The capacity and average cycling potential of the cell increased in the presence of SiO₂. By quantum chemical modeling, it was shown that SiO₂ nanoparticles served as a framework for polyimide, which retained its fixed structure upon metalation with sodium.     

Heat conductivity and Dufour effect in the weakly ionized,magnetized, and kappa-distributed plasma

By using the generalized Boltzmann equation of transport and the first-order approximation of Chapman-Enskog expansion on the κ-distribution function, we study the thermal conductivity and Dufour effect in the weakly ionized and magnetized plasma. We show that the thermal conductivity and Dufour coefficient in the κ-distributed plasma are significantly different from those in the Maxwell-distributed plasma, and the transverse thermal conductivity and Dufour coefficient in the κ-distributed plasma are generally greater than those in the Maxwell-distributed plasma, and the Righi-Leduc coefficient and Hall Dufour coefficient in the κ-distributed plasma are also generally greater than those in the Maxwell-distributed plasma.     

低温圆截面直肋结霜工况下的传热研究

通过对低温圆截面直肋在自然对流下的结霜研究,得出肋片在低温下的结霜特点和传热特性。空气相对湿度对结霜起主导作用,同一空气相对湿度下,霜层主要参数都在相仿的数值范围内变化。肋基温度对霜层生长的影响较小,但仍存在一种随着肋基温度的降低,结霜厚度随之增加的微弱趋势。随着空气相对湿度的增加,霜层厚度增大,但通过霜层的热通量和传热比反而增大,霜层物性对霜层的传热起决定性影响。     

热源塔热泵系统夏季工况优化运行实验研究

由于热源塔在冬夏季工况下的换热能力存在较大差异,按冬季工况设计的热源塔热泵系统,在夏季工况下运行时存在换热能力过剩的问题,影响系统性能。为解决上述问题,本文构建了热源塔热泵系统,实验研究了其冬夏季工况的性能差异。在此基础上,对夏季工况下的优化运行进行了实验研究,结果表明,通过调节空气和溶液流量,将热源塔的逼近度和冷幅分别控制在3.5℃和4.3℃,可使得系统性能系数由3.6提升至3.9,并对其节能机理进行了分析。     

一种新型空气源高温热泵的热力学分析

本文提出了一种供热温度为80~100℃的新型空气源高温热泵循环(EIHP),该循环采用非共沸混合工质R290/R600a,利用内部自复叠技术和喷射器提升循环性能。针对EIHP循环建立了相应的热力学计算模型,并与传统热泵循环(CHP)进行了对比研究。根据计算结果,当冷凝器出口温度为100℃,蒸发器出口温度从25℃下降到-10℃时,相较于CHP循环,EIHP循环的COP提高了15%~27%,压缩机压比降低了20%~46%,容积制热量提高了22%~51%。此外,本文还研究了冷凝器出口温度,工质配比等参数对循环性能的影响情况。